PROFTP

eero
Site Admin
Viestit: 329
Liittynyt: 07 Marras 2007 20:17

PROFTP

Viesti Kirjoittaja eero »

#
#
# Perusasetukset. Kaksi käyttäjää joiden kotihakemisto on /home/FTP-jako
# Käyttäjällä theboss on kaikki oikeudet kaikkialle
# Käyttäjällä mavaan on vain latausoikeus download-kansiosta ja
# saa ladata tiedostoja upload-kansioon
# porttina käytetään 2121
# /etc/proftpd/proftpd.conf -- ProFTPD asetustiedosto.
#
# Ja näin se tapahtuu
# Asennetaan
# sudo apt-get install proftpd
# Lisätään
# sudo gedit /etc/shells
# rivi
# /bin/false
# Luodaan FTP-jako hakemisto
# cd /home
# sudo mkdir FTP-jako
# Luodaan niiden alle download- ja upload-hakemistot
# cd /home/FTP-jako/
# sudo mkdir download
# sudo mkdir upload
# Annetaan hakemisto-oikeudet
# cd /home
# sudo chmod 755 FTP-jako
# cd FTP-jako
# sudo chmod 777 download
# sudo chmod 777 upload
# Kopioidaan tämä ja annetaan komento
# sudo gedit /etc/proftpd/proftpd.conf
# ja liitetetään
# Luodaan käyttäjät theboss ja mavaan
# sudo useradd theboss -p thebosssalasana -d /home/FTP-jako -s /bin/false
# sudo useradd mavaan -p mavaansalasana -d /home/FTP-jako -s /bin/false
# Annetaan salasanat käyttäjille
# sudo passwd theboss -> salasana kahdesti
# sudo passwd mavaan -> salasana kahdesti
# Käynnistetään FTP uusiksi
# sudo /etc/init.d/proftpd restart
#
# Ja vapaa ajattelu on sallittua nimien ym. osalta ;-)
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
# Poistetaan IPv6 käytöstä. Ei tarvita vielä.
UseIPv6 off
# If set on you can experience a longer connection delay in many cases.
IdentLookups off

ServerName "Eeron FTP"
ServerType standalone
DeferWelcome on

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter \*.*/


# Set /home/FTP-shared directory as home directory
DefaultRoot /home/FTP-jako

# Use this to jail all users in their homes
# Estetään käyttäjän pääsy muuhun kuin kotihakemistoonsa, ***** TOSI TÄRKEÄ *****
DefaultRoot ~

# Näytetään onnistuneesta kirjautumisesta viesti
AccessGrantMsg "Tervetuloa !!!"
# Tämä näytetään ennen kirjautumista
ServerIdent on "Odotetaan tunnistautumista"


# Kenen sallitaan kirjautua
# Kun lisäät uuden käyttäjän se pitää lisätä myös tähän
<Limit LOGIN>
AllowUser mavaan
AllowUser theboss
DenyALL
</Limit>

## Määritetään hakemisto-oikeudet

<Directory /home/FTP-jako>
Umask 022 022
AllowOverwrite off
<Limit MKD STOR DELE XMKD RNRF RNTO RMD XRMD>
AllowUser theboss
DenyAll
</Limit>
</Directory>

<Directory /home/FTP-jako/download/*>
Umask 022 022
AllowOverwrite off
<Limit MKD STOR DELE XMKD RNEF RNTO RMD XRMD>
AllowUser theboss
DenyAll
</Limit>
</Directory>

<Directory> /home/FTP-jako/upload/>
Umask 022 022
AllowOverwrite on
<Limit READ RMD DELE>
AllowUser theboss
DenyAll
</Limit>

<Limit STOR CWD MKD>
AllowAll
</Limit>
</Directory>

##### Hakemistomääritykset päättyy ######

# FTP:n käyttämä portti. 21 on oletus.
# Turvallisuuden vuoksi kannattaa käyttää muuta
Port 21

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 84.249.126.176

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Asetetaan käyttäjä ja ryhmä jotka käyttää palvelua
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=d ... 2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

# Jos haluaa käyttää anonymous-tiliä niin poista alta kommentti-merkit.

# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>